HPE ProLiant DL300 Gen11 OCP1 x16 Enablement Kit

HPE ProLiant DL300 Gen11 OCP1 x16 Enablement Kit

This OCP cable upgrade connects an MCIO socket from CPU1 to the OCP1 x16 upgrade slot,
but in doing-so will require that the MCIO CPU1 connection which is normally connected to OCP2 (x8) port is removed.
This essentially disables OCP Port 2 (OCP2), and is achieved by removing it from the pre-installed basket.
To re-enable OCP Port 2 the addition of the 2nd CPU along with a different CPU2 to OCP2 (x8) cable kit will be necessary,
and can furthermore be upgraded to full OCP2 x16 performance via a further upgrade if required by some high bandwidth OCP NICs.
**********************************************************

- for 2SFF U.3 drive cage selection in 1 Processor configuration:

- If 2SFF Drive cage is connected to Direct Attach (without Internal controller and 2SFF cable) and NVMe drive is selected, then "CPU1 to OCP2 x8" and "OCP1 x16" OCP upgrade kit cannot be selected.

- For 2SFF U.2 drive cage selection in 1 Processor configuration:

- If 2SFF Drive cage is connected to Direct Attach (without Internal controller and 2SFF cable), then"CPU1 to OCP2 x8" and "CPU1 to OCP1 x16" OCP upgrade kit cannot be selected.

- If no OCP enablement kit is selected, then x16 OCP cannot be selected.

- If no OCP enablement kit is selected, then Max 1 of OCP/ OROC can be selected.

- "CPU1 to OCP2 x8" and "CPU1 to OCP1 x16" cannot be selected together.

- If any one of "CPU1 to OCP1 x16" or "CPU2 to OCP2 x16" is selected, then Max 1 of x16 (>=100G) card can be selected per server.

- If both "CPU1 to OCP1 x16" and "CPU2 to OCP2 x16" are selected, then Maximum 2 of x16 (>=100G) card can be selected per server.

- If 8SFF x4 and 2SFF Drive cages are selected without controller, then "CPU1 to OCP1 x16" and "CPU1 to OCP2 x8" cannot be selected.

- Warning Message has to be displayed in the configurator any time this OCP card is selected:

- "CPU1 to OCP1 x16" or "CPU2 to OCP2 x16" OCP Upgrade kit can be selected with this OCP card if customer wants to have OCP x16 connectivity.

- Not available for 20EDSFF CTO Server.